Comments on: BZR-X Series 7″ LED Driving Lights (Pair w/Harness)

By: Matthew crouch

Matthew crouch — Tue, 24 Oct 2023 05:48:52 +0000

These lights are bloody awesome 7″bzr’s .I’ve had led lights on other vehicles but none compare to these lights. Highly recommended and my mate just purchased the 9″ for his rig..

By: Chris Smith

Chris Smith — Tue, 05 Sep 2023 08:13:17 +0000

Absolutely the best driving lights I ever had for the size. I considered the bigger set but after using these no need better than expected and still leaves great air flow through the grill.
Great job girls n boys

By: John Scott

John Scott — Mon, 18 Jul 2022 01:22:47 +0000

Great lights, everything I expected from Hardkorr + more. 5 stars from me!

By: Omar

Omar — Wed, 20 Apr 2022 18:48:38 +0000

I bought the BZR-X Series 7″ LED lights 3 pairs and installed them to my jimny jb74 im happy with a lights bright especially the DRL was amazing looks on my jimny
Easy to install with full harness and hardware including at the package thanks for hardkorr team .
And I’m looking forward to order the 9” for my tundra

By: David S

David S — Tue, 19 Apr 2022 03:52:01 +0000

Fairly happy with the 7″ lights. Very bright, decent throw on the straight. May try the blue covers as glare can be harsh off yellow or white rod signs. Not as much spread as the sales guy I dealt with at a chain 4WD store inferred there would be. So doing windy roads can be a bit frustrating as the next corner isn’t illuminated as well as you would like. (Lots of windy roads in Tas!)
Installation was reasonably straight forward, the harness had plenty extra on the light side of the relay which had to be tucked away. As others have noted the switch did not fit. Had to shell out another $30 for a Prado specific one. The DRLs took a little bit of stuffing around to find the right fuse, ended up using the power outlets fuse in the cabin fuse box. The inclusion of 2 of each type of fuse could be handy – Prado ones do not fit the piggy back adapter.
They look pretty good on the car and the DRLs are a nice touch. Maybe could have squeezed the 9″ in the bull bar…

By: Daryl clay

Daryl clay — Tue, 01 Feb 2022 06:32:01 +0000

Great product looks great on the bar, finally tested them out on a long run great lighting up the rd, & works well with auto headlight dim sensors

By: David Webster

David Webster — Sun, 30 Jan 2022 02:48:15 +0000

These lights are brilliant, haven’t had the chance to adjust them properly yet as you need a long stretch of road in front of you. The DRL are great and look so good, they persuaded me to purchase this product and couldn’t be happier. Just have to be careful when adjusting the screws that they come with, easy to strip if your not careful. I didn’t use the harness that they come with because I already had spotlight on the vehicle, it’s pretty easy to run the white DRL wire to a seperate relay then that can run off your parking lights, so when your parking lights turn on the DRL will turn off, but be aware that this can cause issues with dimming lights on the dash such as an aftermarket stereo.

By: Mr Ronald Ensbey

Mr Ronald Ensbey — Sat, 29 Jan 2022 03:39:40 +0000

I fitted the 7″ lights to my Toyota RAV4 (2013). I mounted them on the nudge bar, they look & preform great, the only thing the switch in the kit was too large & I have to buy a Narava driving light switch to fit in the dash. Great product hope to have many years of night driving ahead.

By: Neil Winch

Neil Winch — Thu, 30 Dec 2021 07:14:18 +0000

Love the look of these lights with my Suzuzki Jimny. I mounted them on the nudge bar, had them installed professionally after I also purchased a piggy back adaptor and proper fitting switch. Being such a small car the harness is a bit long, so bit of cable tying required to tidy it all up. The DRL’s are awesome, that was what swayed my purchase.

By: Tim

Tim — Sun, 05 Dec 2021 08:16:54 +0000

Really Happy with the purchase. Lights look cool with the halo during the day. Very effective pencil beam when on. Brought clear covers as well. Easy to install with the wiring harness and the piggy back suited to my Ranger PX 2. Plug and play.