Battery Chargers - Hardkorr Australia https://hardkorr.com/au/battery-chargers/ Camping, 4x4 and Outdoor Gear Thu, 13 Jun 2024 01:07:24 +0000 en-AU hourly 1 https://wordpress.org/?v=6.4.5 https://hardkorr.com/au/wp-content/uploads/sites/2/cropped-favicon-AU-32x32.png Battery Chargers - Hardkorr Australia https://hardkorr.com/au/battery-chargers/ 32 32 40A DC-DC Charger Wiring Kit https://hardkorr.com/au/product/40a-dc-dc-charger-wiring-kit/ https://hardkorr.com/au/product/40a-dc-dc-charger-wiring-kit/#respond Wed, 29 May 2024 23:36:54 +0000 https://hardkorr.com/au/?post_type=product&p=191148 This kit will help you set up your DC-DC charger for your dual battery system with ease. Coming with heavy-duty 6AWG wiring, a 60A fuse, and a three-pin Anderson-style plug, ready to connect directly to your 40A DC-DC Charger, this wiring kit has been made to make for a quick but professional install.

The post 40A DC-DC Charger Wiring Kit appeared first on Hardkorr Australia.

]]>

This plug-and-play 40A DC-DC Charger wiring kit makes it easy to install your DC-DC – helping to keep your batteries topped up while on the road or via the sun with a solar input.

At 6.5 metres long, there’s enough wiring to help get you from the engine bay to the back of the vehicle, suitable for even those longer 4×4 setups. Using a heavy-duty 6AWG cable and a 60A fuse, this kit will help minimise the voltage drop between your starter and auxiliary battery and protect your setup from damage in case of a system fault.

In the kit, you’ll find a 3m accessories lead, designed for use on vehicles with a smart alternator, a pre-wired 3-pin Anderson-style lead designed to plug straight into your DC-DC, as well as a replacement fuse, cable ties, and a couple of screws to help mount your Anderson-style connector in place.

Features:

  • Three-in Anderson Plug with Built-in Ignition Wire: This innovative plug design incorporates a built-in ignition wire, simplifying the installation process and ensuring a secure and reliable connection for your charging system.
  • Backwards Compatible with Two-Pin Plugs: Our wiring kit is designed to be backwards compatible with two-pin plugs, offering greater flexibility and compatibility with a wider range of existing setups.
  • 6.5m 6AWG Cable with 60A Fuse: The kit includes a 6.5-meter long, heavy-duty 6AWG cable, providing ample length for various installation scenarios. The integrated 60A fuse adds an extra layer of protection, ensuring safe and efficient operation of your charging system.

The Hardkorr guarantee

All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 2-year Australian warranty and a 30-day money back guarantee.

Specifications

Cable length Red/black cable: 6.5m 6AWG
Blue cable: 1.5mm²/15AWG
Ring terminal size M8
Fuse 60A

Pack Contents

1x 6.5m 6AWG cable with 40A fuse
1x Replacement 60A fuse
10x Cable ties
4x Plug mounting screws
1x 3-pin Anderson-style plug
6x Spare Anderson-style plug terminals
1x 3m Accessories wire

The post 40A DC-DC Charger Wiring Kit appeared first on Hardkorr Australia.

]]>
https://hardkorr.com/au/product/40a-dc-dc-charger-wiring-kit/feed/ 0
25A DC-DC Charger Wiring Kit https://hardkorr.com/au/product/25a-dc-dc-charger-wiring-kit/ https://hardkorr.com/au/product/25a-dc-dc-charger-wiring-kit/#respond Fri, 01 Mar 2024 00:15:23 +0000 https://hardkorr.com/au/?post_type=product&p=190982 This kit will help you set up your DC-DC charger for your dual battery system with ease. Coming with heavy-duty 9AWG wiring, a 40A fuse, and a three-pin Anderson-style plug, ready to connect directly to your 25A DC-DC Charger, this wiring kit has been made to make for a quick but professional install.

The post 25A DC-DC Charger Wiring Kit appeared first on Hardkorr Australia.

]]>

This plug-and-play 25A DC-DC Charger wiring kit makes it easy to install your DC-DC – helping to keep your batteries topped up while on the road or via the sun with a solar input.

At 6.5 metres long, there’s enough wiring to help get you from the engine bay to the back of the vehicle, suitable for even those longer 4×4 setups. Using a heavy-duty 9AWG cable and a 40A fuse, this kit will help minimise the voltage drop between your starter and auxiliary battery and protect your setup from damage in case of a system fault.

In the kit, you’ll find a 3m accessories lead, designed for use on vehicles with a smart alternator, a pre-wired 3-pin Anderson-style lead designed to plug straight into your DC-DC, as well as a replacement fuse, cable ties, and a couple of screws to help mount your Anderson-style connector in place.

Features:

  • 6.5m 9AWG Cable with 40A Fuse: The kit includes a 6.5-meter long, heavy-duty 9AWG cable, offering sufficient length for diverse installation scenarios. The integrated 40A fuse provides added protection, ensuring safe and efficient operation of your charging system.
  • Three-Pin Anderson Plug with Built-in Ignition Wire: This advanced plug design features a built-in ignition wire, simplifying the installation process and ensuring a secure and reliable connection for your charging system.
  • Backwards Compatible with Two-Pin Plugs: Our wiring kit is designed to be backwards compatible with two-pin plugs, offering greater flexibility and compatibility with a broader range of existing setups.

The Hardkorr guarantee

All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 2-year Australian warranty and a 30-day money back guarantee.

Specifications

Cable length Red/black cable: 6.5m 9AWG
Blue cable: 1.5mm²/15AWG
Ring terminal size M8
Fuse 40A

Pack Contents

1x 6.5m 9AWG cable with 40A fuse
1x Replacement 40A fuse
10x Cable ties
4x Plug mounting screws
1x 3-pin Anderson-style plug
6x Spare Anderson-style plug terminals
1x 3m Accessories wire

The post 25A DC-DC Charger Wiring Kit appeared first on Hardkorr Australia.

]]>
https://hardkorr.com/au/product/25a-dc-dc-charger-wiring-kit/feed/ 0
25A 9-Stage AC 240V Battery Charger https://hardkorr.com/au/product/25a-9-stage-ac-240v-battery-charger/ https://hardkorr.com/au/product/25a-9-stage-ac-240v-battery-charger/#comments Fri, 03 Nov 2023 02:52:50 +0000 https://hardkorr.com/au/?post_type=product&p=123211 Charge your batteries from AC/mains power with our 240V Battery Chargers. Equipped with an automatic 9-stage charging system, our chargers are designed to quickly get your batteries up to health. The charger can be used with 12V SLA, AGM, calcium, and LiFePO4 batteries.

The post 25A 9-Stage AC 240V Battery Charger appeared first on Hardkorr Australia.

]]>

Charge your batteries from home

25A MAX OUTPUT
EASY CONNECT CABLES
COMPATIBLE WITH LITHIUM BATTERIES
9-STAGE CHARGING ALGORITHM

Perfect for charging your batteries before or after your trips from home, or from a powered site at a caravan park, our AC Chargers are one of the easiest ways to top up your batteries.

Feeding power into your batteries at up to 25A per hour, the chargers will quickly get your batteries back to health using our battery-specific 9-stage charging algorithm.

The charger is compatible with a range of battery chemistries including LiFePO4. Allowing you to quickly wake up a lithium battery that has been over-discharged and put into protection mode, the chargers have an automatic BMS wake-up function to help get your batteries back in action.

The charger has cables coming from the base of the unit and comes with four pre-drilled mounting holes at each corner, allowing the unit to very easily be mounted on the wall of your garage or workshop. It also comes with a ring terminal adaptor and an alligator clip attachment making it easy to use – just set the battery type and connect it to your battery.

Efficient Charging

9 Stage Charging

Our chargers come with an automatic 9-stage charging algorithm, designed to charge your batteries quickly and in the healthiest manner possible.

The chargers will proceed through a diagnostic, and soft start setting to help ease the battery into a charge cycle before kicking into the main bulk charge stage.

The chargers will then progress into an absorption and analysis charge followed by a maintenance setting, designed to nurture your battery through the charge cycle.

*NOTE: lithium batteries do not go through the pulse/desulphation stage

The Hardkorr guarantee

All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 2-year Australian warranty and a 30-day money back guarantee.

Specifications

Rated Input/Output 220-240V – 12V/25A
Compatible batteries 12V SLA, AGM, Cal, LiFePO4
Efficiency >90%
Inbuilt Protections Over-charge, over-temp, short circuit, reverse polarity protections
Dimensions 241mm (L) x 133mm (W) x 65mm (H)
Certifications AS/NZS 60335:1 :2020+A1 :2021, AS/NZS 60335.2.29:2017+A1:2020, AS/NZS 3112:2017, AS/NZS 3100:2017

Pack Contents

1x 25A battery charger
1x Easy connect plug to alligator clips adaptor (30A fused)
1x Easy connect plug to M8 ring terminals adaptor (30A fused)

The post 25A 9-Stage AC 240V Battery Charger appeared first on Hardkorr Australia.

]]>
https://hardkorr.com/au/product/25a-9-stage-ac-240v-battery-charger/feed/ 1
15A 9-Stage AC 240V Battery Charger https://hardkorr.com/au/product/15a-9-stage-ac-240v-battery-charger/ https://hardkorr.com/au/product/15a-9-stage-ac-240v-battery-charger/#respond Thu, 02 Nov 2023 23:53:49 +0000 https://hardkorr.com/au/?post_type=product&p=123105 Charge your batteries from AC/mains power with our 240V Battery Chargers. Equipped with an automatic 9-stage charging system, our chargers are designed to quickly get your batteries up to health. The charger can be used with 12V SLA, AGM, calcium, and LiFePO4 batteries.

The post 15A 9-Stage AC 240V Battery Charger appeared first on Hardkorr Australia.

]]>

Charge your batteries from home

15A MAX OUTPUT
EASY CONNECT CABLES
COMPATIBLE WITH LITHIUM BATTERIES
9-STAGE CHARGING ALGORITHM

Perfect for charging your batteries before or after your trips from home, or from a powered site at a caravan park, our AC Chargers are one of the easiest ways to top up your batteries.

Feeding power into your batteries at up to 15A per hour, the chargers will quickly get your batteries back to health using our battery-specific 9-stage charging algorithm.

The charger is compatible with a range of battery chemistries including LiFePO4. Allowing you to quickly wake up a lithium battery that has been over-discharged and put into protection mode, the chargers have an automatic BMS wake-up function to help get your batteries back in action.

The charger has cables coming from the base of the unit and comes with four pre-drilled mounting holes at each corner, allowing the unit to very easily be mounted on the wall of your garage or workshop. It also comes with a ring terminal adaptor and an alligator clip attachment making it easy to use – just set the battery type and connect it to your battery.

Efficient Charging

9 Stage Charging

Our chargers come with an automatic 9-stage charging algorithm, designed to charge your batteries quickly and in the healthiest manner possible.

The chargers will proceed through a diagnostic, and soft start setting to help ease the battery into a charge cycle before kicking into the main bulk charge stage.

The chargers will then progress into an absorption and analysis charge followed by a maintenance setting, designed to nurture your battery through the charge cycle.

*NOTE: lithium batteries do not go through the pulse/desulphation stage

The Hardkorr guarantee

All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 2-year Australian warranty and a 30-day money back guarantee.

Specifications

Rated Input/Output 220-240V – 12V/15A
Compatible batteries 12V SLA, AGM, Cal, LiFePO4
Efficiency >90%
Inbuilt Protections Over-charge, over-temp, short circuit, reverse polarity protections
Dimensions 217mm (L) x 108mm (W) x 62mm (H)
Certifications AS/NZS 60335:1 :2020+A1 :2021, AS/NZS 60335.2.29:2017+A1:2020, AS/NZS 3112:2017, AS/NZS 3100:2017

Pack Contents

1x 15A battery charger
1x Easy connect plug to alligator clips adaptor (20A fused)
1x Easy connect plug to M8 ring terminals adaptor (20A fused)

The post 15A 9-Stage AC 240V Battery Charger appeared first on Hardkorr Australia.

]]>
https://hardkorr.com/au/product/15a-9-stage-ac-240v-battery-charger/feed/ 0
Under Bonnet 40A DC-DC Battery Charger With MPPT Solar Regulator https://hardkorr.com/au/product/under-bonnet-40a-dc-dc-battery-charger-with-mppt-solar-regulator/ https://hardkorr.com/au/product/under-bonnet-40a-dc-dc-battery-charger-with-mppt-solar-regulator/#respond Wed, 01 Nov 2023 23:08:03 +0000 https://hardkorr.com/au/?post_type=product&p=123069 Charge your batteries while you drive using your vehicle’s alternator or via solar, using the inbuilt MPPT solar regulator with our 40A Under Bonnet DC-DC Charger. Coming with a dedicated charging setting to suit 12V SLA, AGM, gel, calcium, and LiFePO4 systems, it’s ideal for most 4x4, caravan, and camper trailer dual battery setups. Built with a high heat tolerance, the charger can withstand temperatures up to 80°C, making it ideal for mounting in places like your engine bay or 4x4 canopy.

The post Under Bonnet 40A DC-DC Battery Charger With MPPT Solar Regulator appeared first on Hardkorr Australia.

]]>

Charge your battery while you drive or with the sun

40A MAX OUTPUT
MPPT SOLAR REGULATOR
HIGH OPERATING TEMPERATURE
IP66 WATERPROOF
COMPATIBLE WITH LITHIUM BATTERIES

Whether you’re touring the country with the family in tow or just trying to keep your drinks icy cold between job sites, our DC-DC charger is one of the easiest ways to keep your batteries topped up without being tethered to a mains power supply. The charger can be used on a range of batteries including both 12V SLA, AGM, gel, calcium, and LiFePO4 systems.

The DC-DC works by converting the power from your alternator into a charge voltage that carefully, but quickly, suits the status, and chemistry of your auxiliary battery all without affecting your vehicle’s starter battery. Designed to work on most vehicles, it’s compatible with either traditional or fixed/smart alternators and will feed up to 40A into your batteries per hour.

There’s a dedicated Anderson-style plug coming from the unit for the inbuilt Maximum Power Point Tracking (MPPT) solar regulator function. The charger will use the power coming from the solar input when it detects it as either the only available power source, or if the solar input exceeds the power being produced by the vehicle. Able to regulate up to 40A, it’s able to handle solar up to 15% more efficiently than traditional Pulse Width Modulation (PWM) regulators.

With a high heat tolerance, the charger can be mounted in most places including under the bonnet. This is particularly useful in vehicles that have the space for an additional battery in the engine bay, like in Landcruisers and Patrols, helping to not only reduce voltage drop but also free up some space in the back of the vehicle.

The charger comes with three pre-wired Anderson-style plugs to make installation simple. The black plug connects directly to the auxiliary battery, the traditional grey plug is the dedicated solar input, whilst the three-pin Anderson plug can be used to quickly connect to the vehicle.

Engine bay ready

Engine Bay Ready

  • HIGH OPERATING TEMPERATURE – Equipped to work in temperatures ranging from -20°C – 80°C.
  • IP66 WATERPROOF – Protected against dust and water making it perfect for the rigours of the engine-bay.
  • COMPACT CONSTRUCTION – The small footprint of the charger makes it perfect for mounting in tight spaces.

Why use a DC-DC Charger?

  • Charge your auxiliary batteries up to 100%
  • Faster charging
  • Prolongs the life of your batteries
  • Works with both traditional and smart alternator setups
  • Compatible with lithium batteries

Product Video

The Hardkorr guarantee

All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 2-year Australian warranty and a 30-day money back guarantee.

Specifications

DC Battery Input 9-32V
MPPT Solar Input Voltage 10-32V
Maximum Input Current 47A
Maximum Output Power 40A
Minimum Solar Input 30W
Ingress Protection IP66
Operating Temp. -20°C – 80°C
Compatibility 12 SLA, AGM,Gel, Cal, LiFePO4
Dimensions 183 (L) x 129.3mm (W) x 46.4mm (H)
Certifications IEC/EN 61000-6-1

Pack Contents

1x 40A DC-DC Charger With Pre-Wired Three-Pin Anderson Plug

The post Under Bonnet 40A DC-DC Battery Charger With MPPT Solar Regulator appeared first on Hardkorr Australia.

]]>
https://hardkorr.com/au/product/under-bonnet-40a-dc-dc-battery-charger-with-mppt-solar-regulator/feed/ 0
Under Bonnet 25A DC-DC Battery Charger With MPPT Solar Regulator https://hardkorr.com/au/product/under-bonnet-25a-dc-dc-battery-charger-with-mppt-solar-regulator/ https://hardkorr.com/au/product/under-bonnet-25a-dc-dc-battery-charger-with-mppt-solar-regulator/#respond Wed, 01 Nov 2023 04:02:24 +0000 https://hardkorr.com/au/?post_type=product&p=123036 Charge your batteries while you drive using your vehicle’s alternator or via solar, using the inbuilt MPPT solar regulator with our 25A Under Bonnet DC-DC Charger. Coming with a dedicated charging setting to suit 12V SLA, AGM, gel, calcium, and LiFePO4 systems, it’s ideal for most 4x4, caravan, and camper trailer dual battery setups. Built with a high heat tolerance, the charger can withstand temperatures up to 80°C, making it ideal for mounting in places like your engine bay or 4x4 canopy.

The post Under Bonnet 25A DC-DC Battery Charger With MPPT Solar Regulator appeared first on Hardkorr Australia.

]]>

Charge your battery while you drive or with the sun

25A MAX OUTPUT
MPPT SOLAR REGULATOR
HIGH OPERATING TEMPERATURE
IP66 WATERPROOF
COMPATIBLE WITH LITHIUM BATTERIES

Whether you’re touring the country with the family in tow or just trying to keep your drinks icy cold between job sites, our DC-DC charger is one of the easiest ways to keep your batteries topped up without being tethered to a mains power supply. The charger can be used on a range of batteries including both 12V SLA, AGM, gel, calcium, and LiFePO4 systems.

The DC-DC works by converting the power from your alternator into a charge voltage that carefully, but quickly, suits the status, and chemistry of your auxiliary battery all without affecting your vehicle’s starter battery. Designed to work on most vehicles, it’s compatible with either traditional or fixed/smart alternators and will feed up to 25A into your batteries per hour.

There’s a dedicated Anderson-style plug coming from the unit for the inbuilt Maximum Power Point Tracking (MPPT) solar regulator function. The charger will use the power coming from the solar input when it detects it as either the only available power source, or if the solar input exceeds the power being produced by the vehicle. Able to regulate up to 25A, it’s able to handle solar up to 15% more efficiently than traditional Pulse Width Modulation (PWM) regulators.

With a high heat tolerance, the charger can be mounted in most places including under the bonnet. This is particularly useful in vehicles that have the space for an additional battery in the engine bay, like in Landcruisers and Patrols, helping to not only reduce voltage drop but also free up some space in the back of the vehicle.

The charger comes with three pre-wired Anderson-style plugs to make installation simple. The black plug connects directly to the auxiliary battery, the traditional grey plug is the dedicated solar input, whilst the three-pin Anderson plug can be used to quickly connect to the vehicle.

Engine bay ready

Engine Bay Ready

  • HIGH OPERATING TEMPERATURE – Equipped to work in temperatures ranging from -20°C – 80°C.
  • IP66 WATERPROOF – Protected against dust and water making it perfect for the rigours of the engine-bay.
  • COMPACT CONSTRUCTION – The small footprint of the charger makes it perfect for mounting in tight spaces.

Why use a DC-DC Charger?

  • Charge your auxiliary batteries up to 100%
  • Faster charging
  • Prolongs the life of your batteries
  • Works with both traditional and smart alternator setups
  • Compatible with lithium batteries

Product Video

The Hardkorr guarantee

All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 2-year Australian warranty and a 30-day money back guarantee.

Specifications

DC Battery Input 9-32V
MPPT Solar Input Voltage 10-32V
Maximum Input Current 30A
Maximum Output Power 25A
Minimum Solar Input 15W
Ingress Protection IP66
Operating Temp. -20°C – 80°C
Compatibility 12 SLA, AGM,Gel, Cal, LiFePO4
Dimensions 156mm (L) x 130mm (W) x 45mm (H)
Certifications IEC/EN 61000-6-1

Pack Contents

1x 25A DC-DC Charger With Pre-Wired Three-Pin Anderson Plug

The post Under Bonnet 25A DC-DC Battery Charger With MPPT Solar Regulator appeared first on Hardkorr Australia.

]]>
https://hardkorr.com/au/product/under-bonnet-25a-dc-dc-battery-charger-with-mppt-solar-regulator/feed/ 0
6A AC Battery Charger with Automatic 6/12V DC Recognition https://hardkorr.com/au/product/6a-ac-battery-charger-with-automatic-6-12v-dc-recognition/ https://hardkorr.com/au/product/6a-ac-battery-charger-with-automatic-6-12v-dc-recognition/#respond Fri, 06 Oct 2023 08:00:51 +0000 https://hardkorr.com/au/?post_type=product&p=121543 Charge your 6V or 12V batteries directly from mains/AC power. Compatible with AGM, wet cell, calcium, and LiFePO4 compounds, our 6A Chargers are ideal for supplying maintenance, reconditioning, or a full charge on batteries such as those found in caravans, boats, or 4x4 setups.

The post 6A AC Battery Charger with Automatic 6/12V DC Recognition appeared first on Hardkorr Australia.

]]>

Charge your batteries from home

Our 6A AC Chargers make charging your batteries from mains/AC power easy.

Suitable for charging both 6V and 12V batteries ranging from 4-150Ah, the charger is ideal for use on deep-cycle batteries such as those found in, caravans, 4×4 dual battery setups, or other recreational vehicles. Simply plug the unit into any available mains AC port and connect the other end to the battery to begin charging.

The charger will display the battery voltage and a state of charge display via the in-built LCD screen while connected to your battery. Also on the front of the charger is a function button that allows you to change between a dedicated 12V standard lead acid, 12V LiFePO4, 12V maintenance, 12V reconditioning, and a 6V standard charge setting.

The charger also has a range of inbuilt safety features including short circuit, overload, reverse polarity, overcharge, and over-temperature protections. Coming complete with an alligator clip and battery terminal adaptor to make charging your batteries easy, and a hook at the rear for storage, the charger is backed by our comprehensive 3-year warranty.

The Hardkorr guarantee

All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 3-year Australian warranty and a 30-day money back guarantee.

Specifications

Compatible batteries 6/12V AGM, Wet Cell, Calcium, and LiFePO4
Operating voltage 220-240V 50/60Hz
Charging current Max 6A
Supply function max output 5A
Battery charge capacity 4-150Ah
Ingress protection IP65
Operating temperature -20°C to 40°C
Certifications AS/NZS 60335:1 :2020+A1 :2021, AS/NZS 60335.2.29:2017+A1:2020, AS/NZS 3112:2017, AS/NZS 3100:2017

Charging Programs

12V standard lead-acid Max. 6A
12V LiFePO4 14.6V DC / 6A
12V maintenance 14.4V DC / 1A
12V reconditioning 16.5V DC / 1.5A
6V standard 7.5V DC / 2A

Pack Contents

1x 6A battery charger
1x SAE plug to alligator clips adaptor
1x SAE plug to ring terminals adaptor (15A fused)

The post 6A AC Battery Charger with Automatic 6/12V DC Recognition appeared first on Hardkorr Australia.

]]>
https://hardkorr.com/au/product/6a-ac-battery-charger-with-automatic-6-12v-dc-recognition/feed/ 0
10A AC Battery Charger with Automatic 6/12V DC Recognition https://hardkorr.com/au/product/10a-ac-battery-charger-with-automatic-6-12v-dc-recognition/ https://hardkorr.com/au/product/10a-ac-battery-charger-with-automatic-6-12v-dc-recognition/#respond Fri, 06 Oct 2023 08:00:47 +0000 https://hardkorr.com/au/?post_type=product&p=121550 Charge your 6V or 12V batteries directly from mains/AC power. Compatible with AGM, wet cell, calcium, and LiFePO4 compounds, our 10A Chargers are ideal for supplying maintenance, reconditioning, or a full charge on batteries such as those found in caravans, boats, or 4x4 setups.

The post 10A AC Battery Charger with Automatic 6/12V DC Recognition appeared first on Hardkorr Australia.

]]>

Charge your batteries from home

Our 10A AC Chargers make charging your batteries from mains/AC power easy.

Suitable for charging both 6V and 12V batteries ranging from 4-200Ah, the charger is ideal for use on deep-cycle batteries such as those found in, caravans, 4×4 dual battery setups, or other recreational vehicles. Simply plug the unit into any available mains AC port and connect the other end to the battery to begin charging.

The charger will display the battery voltage and a state of charge display via the in-built LCD screen while connected to your battery. Also on the front of the charger is a function button that allows you to change between a dedicated 12V standard lead acid, 12V LiFePO4, 12V maintenance, 12V reconditioning, and a 6V standard charge setting.

The charger also has a range of inbuilt safety features including short circuit, overload, reverse polarity, overcharge, and over-temperature protections. Coming complete with an alligator clip and battery terminal adaptor to make charging your batteries easy, and a hook at the rear for storage, the charger is backed by our comprehensive 3-year warranty

The Hardkorr guarantee

All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 3-year Australian warranty and a 30-day money back guarantee.

Specifications

Compatible batteries 6/12V AGM, Wet Cell, Calcium, and LiFePO4
Operating voltage 220-240V 50/60Hz
Charging current Max 10A
Supply function max output 10A
Battery charge capacity 4-200Ah
Ingress protection IP65
Operating temperature -20°C to 40°C
Certifications AS/NZS 60335:1 :2020+A1 :2021, AS/NZS 60335.2.29:2017+A1:2020, AS/NZS 3112:2017, AS/NZS 3100:2017

Charging Programs

12V standard lead-acid Max. 10A
12V LiFePO4 14.6V DC / 10A
12V maintenance 14.4V DC / 2A
12V reconditioning 16.5V DC / 2.5A
6V standard 7.5V DC / 2A

Pack Contents

1x 10A battery charger
1x SAE plug to alligator clips adaptor
1x SAE plug to ring terminals adaptor (15A fused)

The post 10A AC Battery Charger with Automatic 6/12V DC Recognition appeared first on Hardkorr Australia.

]]>
https://hardkorr.com/au/product/10a-ac-battery-charger-with-automatic-6-12v-dc-recognition/feed/ 0
4A AC Battery Charger with Automatic 6/12V DC Recognition https://hardkorr.com/au/product/4a-ac-battery-charger-with-automatic-6-12v-dc-recognition/ https://hardkorr.com/au/product/4a-ac-battery-charger-with-automatic-6-12v-dc-recognition/#respond Fri, 06 Oct 2023 08:00:42 +0000 https://hardkorr.com/au/?post_type=product&p=121535 Charge your 6V or 12V batteries directly from mains/AC power. Compatible with AGM, wet cell, calcium, and LiFePO4 compounds, our 4A Chargers are ideal for supplying maintenance, reconditioning, or a full charge on batteries such as those found in caravans, boats, or 4x4 setups.

The post 4A AC Battery Charger with Automatic 6/12V DC Recognition appeared first on Hardkorr Australia.

]]>

Charge your batteries from home

Our 4A AC Chargers make charging your batteries from mains/AC power easy.

Suitable for charging both 6V and 12V batteries ranging from 4-120Ah, the charger is ideal for use on deep-cycle batteries such as those found in, caravans, 4×4 dual battery setups, or other recreational vehicles. Simply plug the unit into any available mains AC port and connect the other end to the battery to begin charging.

The charger will display the battery voltage and a state of charge display via the in-built LCD screen while connected to your battery. Also on the front of the charger is a function button that allows you to change between a dedicated 12V standard lead acid, 12V LiFePO4, 12V maintenance, 12V reconditioning, and a 6V standard charge setting.

The charger also has a range of inbuilt safety features including short circuit, overload, reverse polarity, overcharge, and over-temperature protections. Coming complete with an alligator clip and battery terminal adaptor to make charging your batteries easy, and a hook at the rear for storage, the charger is backed by our comprehensive 3-year warranty.

The Hardkorr guarantee

All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 3-year Australian warranty and a 30-day money back guarantee.

Specifications

Compatible batteries 6/12V AGM, Wet Cell, Calcium, and LiFePO4
Operating voltage 220-240V 50/60Hz
Charging current Max 4A
Supply function max output 3A
Battery charge capacity 4-120Ah
Ingress protection IP65
Operating temperature -20°C to 40°C
Certifications AS/NZS 60335:1 :2020+A1 :2021, AS/NZS 60335.2.29:2017+A1:2020, AS/NZS 3112:2017, AS/NZS 3100:2017

Charging Programs

12V standard lead-acid Max. 4A
12V LiFePO4 14.6V DC / 4A
12V maintenance 14.4V DC / 1A
12V reconditioning 16.5V DC / 1.5A
6V standard 7.5V DC / 2A

Pack Contents

1x 4A battery charger
1x SAE plug to alligator clips adaptor
1x SAE plug to ring terminals adaptor (15A fused)

The post 4A AC Battery Charger with Automatic 6/12V DC Recognition appeared first on Hardkorr Australia.

]]>
https://hardkorr.com/au/product/4a-ac-battery-charger-with-automatic-6-12v-dc-recognition/feed/ 0
1A AC Battery Charger With Automatic 6/12V DC Recognition https://hardkorr.com/au/product/1a-ac-battery-charger-with-automatic-6-12v-dc-recognition/ https://hardkorr.com/au/product/1a-ac-battery-charger-with-automatic-6-12v-dc-recognition/#respond Fri, 06 Oct 2023 06:47:13 +0000 https://hardkorr.com/au/?post_type=product&p=121524 Charge your 6V or 12V batteries directly from mains/AC power. Compatible with AGM, wet cell, and calcium compounds, our 1A Chargers are ideal for supplying a trickle/maintenance charge on larger batteries or supply a full charge for smaller setups like those found on hobby systems.

The post 1A AC Battery Charger With Automatic 6/12V DC Recognition appeared first on Hardkorr Australia.

]]>

Charge your batteries from home

Our 1A AC Chargers make charging your batteries from mains/AC power easy.

Suitable for charging both 6V and 12V batteries ranging from 4-30Ah, the charger is ideal for jet skis, golf buggies, or other hobby batteries. Simply plug the charger into any available mains AC port and connect the other end to the battery – the charger will automatically detect the battery voltage and type, to provide a suitable charge in an instant.

Also useful on larger batteries, the charger can be connected to batteries that aren’t in constant use, like caravan, tractor, or mower batteries, to provide a trickle or maintenance charge, keeping your batteries in good shape.

The unit comes with an alligator clip and battery terminal adaptor to make charging your batteries easy, a hook at the rear for storage, and is backed with our comprehensive 3-year warranty.

The Hardkorr guarantee

All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 3-year Australian warranty and a 30-day money back guarantee.

Specifications

Compatible batteries 6/12V AGM, Wet Cell & Calcium
Operating voltage 220-240V 50/60Hz
Charging current Max 1A
Battery charge capacity 4-30Ah
Ingress protection IP65
Operating temperature -20°C to 40°C
Certifications AS/NZS 60335:1 :2020+A1 :2021, AS/NZS 60335.2.29:2017+A1:2020, AS/NZS 3112:2017, AS/NZS 3100:2017

Pack Contents

1x 1A battery charger
1x SAE plug to alligator clips adaptor
1x SAE plug to ring terminals adaptor (15A fused)

The post 1A AC Battery Charger With Automatic 6/12V DC Recognition appeared first on Hardkorr Australia.

]]>
https://hardkorr.com/au/product/1a-ac-battery-charger-with-automatic-6-12v-dc-recognition/feed/ 0