The post 000AWG Battery Linking Cables appeared first on Hardkorr Australia.
]]>Cable gauge | 000AWG / 85mm2 |
---|---|
Cable length | 300mm |
Terminals | M8 / 8mm |
Heat resistance: | Up to 105°C |
1x | 000AWG cable (black) |
---|---|
1x | 000AWG cable (red) |
The post 000AWG Battery Linking Cables appeared first on Hardkorr Australia.
]]>The post 00AWG Inverter Cable Kit W/350A ANS Fuse Suits 3000W Inverter appeared first on Hardkorr Australia.
]]>Fuse type | 350A ANS |
---|---|
Cable gauge | 00AWG / 67.4mm2 |
Cable length | 750mm |
Terminals | M8 with one M10 on one side of the negative |
Heat resistance: | Up to 105°C |
1x | 00AWG cable W/350A ANS fuse (red) |
---|---|
1x | 00AWG cable (black) |
The post 00AWG Inverter Cable Kit W/350A ANS Fuse Suits 3000W Inverter appeared first on Hardkorr Australia.
]]>The post 0AWG Inverter Cable Kit W/250A ANS Fuse Suits 2000W Inverter appeared first on Hardkorr Australia.
]]>Fuse type | 250A ANS |
---|---|
Cable gauge | 0AWG / 53.5mm2 |
Cable length | 750mm |
Terminals | M8 with one M10 on one side of the negative |
Heat resistance: | Up to 105°C |
1x | 0AWG cable W/250A ANS fuse (red) |
---|---|
1x | 0AWG cable (black) |
The post 0AWG Inverter Cable Kit W/250A ANS Fuse Suits 2000W Inverter appeared first on Hardkorr Australia.
]]>The post 000AWG 30cm Shunt to Battery Cable appeared first on Hardkorr Australia.
]]>Cable gauge | 000AWG / 85mm2 |
---|---|
Cable length | 300mm |
Terminals | M8 on one side with M10 on the other |
Heat resistance: | Up to 105°C |
1x | 000AWG cable (black) |
---|
The post 000AWG 30cm Shunt to Battery Cable appeared first on Hardkorr Australia.
]]>The post 2AWG Inverter Cable Kit W/150A ANS Fuse Suits 1000W Inverter appeared first on Hardkorr Australia.
]]>Fuse type | 150A ANS |
---|---|
Cable gauge | 2AWG / 33.6mm2 |
Cable length | 750mm |
Terminals | M8 with one M10 on one side of the negative |
Heat resistance: | Up to 105°C |
1x | 2AWG cable W/150A ANS fuse (red) |
---|---|
1x | 2AWG cable (black) |
The post 2AWG Inverter Cable Kit W/150A ANS Fuse Suits 1000W Inverter appeared first on Hardkorr Australia.
]]>The post 3000W Pure Sine Wave 12V to 240V Inverter (with AC Transfer Switch) appeared first on Hardkorr Australia.
]]>Continuous power | 3000W |
---|---|
AC surge power | 6000W |
AC output | Pure sine waveform, 240V, 50Hz, 15A |
Input DC range | 10.5-15.5V |
Efficiency | 89-92% |
Standby current draw | <1.6A |
Eco-mode current draw | <0.2A |
Outlets | 1x IEC Type I / 1x Hardwire outlet |
Operating temperature | -20°C / 45°C |
Storage temperature | <-30°C / 70°C |
Protections | Over/under voltage, short circuit/overload. over-temperature protections |
Over voltage protection | 15.5±0.2V DC |
Under voltage protection | 10.5±0.2V DC |
Dimensions | 505.5mm x 278.4mm x 103.1mm |
Certifications | AS/NZS 4763:2011, IEC/EN 62368-1 |
1x | 3000W pure sine wave inverter |
---|---|
1x | Inverter remote |
1x | 5m cable adapter for remote |
The post 3000W Pure Sine Wave 12V to 240V Inverter (with AC Transfer Switch) appeared first on Hardkorr Australia.
]]>The post 2000W Pure Sine Wave 12V to 240V Inverter (with AC Transfer Switch) appeared first on Hardkorr Australia.
]]>Continuous power | 2000W |
---|---|
AC surge power | 4000W |
AC output | Pure sine waveform, 240V, 50Hz, 8.3A |
Input DC range | 10.5-15.5V |
Efficiency | 89-92% |
Standby current draw | <1.3A |
Eco-mode current draw | <0.2A |
Outlets | 2 x IEC Type I |
Operating temperature | -20°C / 45°C |
Storage temperature | <-30°C / 70°C |
Protections | Over/under voltage, short circuit/overload. over-temperature protections |
Over voltage protection | 15.5±0.2V DC |
Under voltage protection | 10.5±0.2V DC |
Dimensions | 452.7mm x 253mm x 93.7mm |
Certifications | AS/NZS 4763:2011, IEC/EN 62368-1 |
1x | 2000W pure sine wave inverter |
---|---|
1x | Inverter remote |
1x | 5m cable adapter for remote |
The post 2000W Pure Sine Wave 12V to 240V Inverter (with AC Transfer Switch) appeared first on Hardkorr Australia.
]]>The post 1000W Pure Sine Wave 12V to 240V Inverter (with AC Transfer Switch) appeared first on Hardkorr Australia.
]]>Continuous power | 1000W |
---|---|
AC surge power | 2000W |
AC output | Pure sine waveform, 240V, 50Hz, 4.2A |
Input DC range | 10.5-15.5V |
Efficiency | Full load >89%, Half load >92% |
Standby current draw | <1.1A |
Eco-mode current draw | N/A |
Outlets | 1 x IEC Type I |
Operating temperature | -20°C / 45°C |
Storage temperature | -30°C / 70°C |
Protections | Over/under voltage, short circuit/overload. over-temperature protections |
Over voltage protections | 15.5±0.2V DC |
Under voltage protections | 10.5±0.2V DC |
Dimensions | 404.4mm x 209mm x 78.7mm |
Certifications | AS/NZS 4763:2011, IEC/EN 62368-1 |
1x | 1000W pure sine wave inverter |
---|---|
1x | Inverter remote |
1x | 5m cable adapter for remote |
The post 1000W Pure Sine Wave 12V to 240V Inverter (with AC Transfer Switch) appeared first on Hardkorr Australia.
]]>The post Remote On/Off Switch For Hardkorr Inverters appeared first on Hardkorr Australia.
]]>Cable length | 5m |
---|---|
Dimensions | 83mm (w) x 55mm (h) x 25mm (d) |
Cutout required | 60mm (w) x 50mm (h) |
1x | Inverter remote on/off switch |
---|---|
1x | 5m cable with RJ12 plugs |
The post Remote On/Off Switch For Hardkorr Inverters appeared first on Hardkorr Australia.
]]>The post 0AWG Inverter Cable With 250A Fuse (for use with 2000W inverter) appeared first on Hardkorr Australia.
]]>Cable length | 75cm |
---|---|
Cable gauge | 0AWG (60mm2) |
Fuse type | 250A ANS |
1x | 75cm black cable with ring terminals |
---|---|
1x | 75cm red cable with fuse and ring terminals |
1x | Fuse holder |
The post 0AWG Inverter Cable With 250A Fuse (for use with 2000W inverter) appeared first on Hardkorr Australia.
]]>