DISCONTINUED PRODUCT
This product has been discontinued and is no longer available to purchase. We have kept this page active for the benefit of those who have purchased this product in the past.
Portable 240v power made easy.
For those looking to enjoy a few creatures comforts of home, our 600W inverter allows you to power a few of your favourite 240V appliances off your standard 12V camper, 4×4, or caravan setup. Built as a convenient, easy to mount 240V power station, it comes with a standard 240V socket, making it easy to plug and play those smaller devices.
Hardkorr inverters produce consistent, smooth and clean power just like you’d get from a mains connection. The pure sine waveform has very low harmonic distortion, resulting in a high power factor. This means much lower radio interference, reduced audible and electrical noise, and more efficient operation for inductive loads. It also allows a wider range of devices to be powered from the inverter, some of which may be susceptible to damage if using a modified sine wave inverter. Our inverters are also built to surge up to 1200W which makes it ideal for any appliance that requires a higher start up wattage.
Power is one of the most valuable commodities while on the road, which is why we’ve spent more than 18 months in research & development to create the perfect electrical makeup for power conservation. Engineered with advanced internal circuitry and componentry, our inverters are designed to have an ultra-high conversion efficiency rate of up to 92%, meaning you won’t be wasting a heap of power in the 12-240V power transfer. Increasing the overall efficiency of the unit is our advanced thermoregulation system, which, paired with the oversized heatsink, is designed to keep the inverter quiet, and prevent it from overheating.
Our inverters incorporate advanced protection circuits to guard against short circuit, overload, over-temperature and battery DC over-voltage and low-voltage, ensuring these units are reliable and perfectly safe to use on your adventures.
Key features
- Pure sine wave form is ideal for sensitive devices
- High surge output (2 x constant)
- Australian GPO outlet
- Very high 92% efficiency
- Advanced protection circuitry: short-circuit, overload, over-temperature and more
- Strong inbuilt mounting flange
Built for Australian conditions
Hardkorr inverters were built from the ground up to suit Australian conditions. We’ve incorporated Australian GPO outlets (IEC Type I) and all models comply with applicable Australian and worldwide standards including AS/NZS 4763:2011, UL458 and EN60950-1.
As further evidence of our unwavering commitment to your safety, and to support our claim of being compliant with AS/NZS 4763:2011, our inverters have been independently tested and certified by SAA Approvals, a testing organisation which is accredited by the Joint Accreditation Service of Australia and New Zealand (JAS-ANZ). We are one of the only inverter manufacturers to have undertaken this process, and you can view our Certificate of Suitability (No. SAA201890) in the ‘Documents’ tab of this page.
Rugged, functional construction.
Our inverters are built for hard, constant work. Independent heatsinks decrease the temperature of the case even under heavy load. UL458 certifications means the inverters are guaranteed to meet strict safety standards for use in vehicles.
Product Video
The Hardkorr guarantee
All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 2-year Australian warranty and a 30-day money back guarantee.
Specifications
| AC output waveform | Pure sine wave (THC <3%) |
|---|---|
| AC output power | 600W |
| AC Surge power | 1200W |
| AC output voltage | 240V +/- 5% |
| AC output frequency | 50/60Hz +/- 0.05% |
| Nominal DC input voltage | 12V |
| DC input voltage range | 10.5V – 15V |
| Input current (max) | 60A DC |
| No load current draw | 0.5A DC |
| Efficiency | 92% |
| Outlets | 1 x IEC Type I |
| Cooling fan | Automatic temperature controlled |
| Thermal shutdown | 65°C (+/- 5°C) |
| High battery voltage shutdown | 15.5V DC (+/- 0.3V DC) |
| Low battery voltage alarm/shutdown | Alarm 10.5V DC; shutdown 10.0V DC (+/- 0.3V DC) |
| Internal fuse size | 80A (4 x 20A) blade |
| Weight | 1.9kg |
| Dimensions | 225mm x 166mm x 83mm |
| Certifications | AS/NZS 4763:2011, UL 458, IEC/EN 62368-1 |
Pack Contents
| 1x | 600W pure sine wave inverter |
|---|---|
| 1x | 80A ANS inline fuse |
| 1x | Replacement label |
John (verified owner) –
I matched this with a 100ah Hardkorr lithium battery.
I am very happy with this, I find 600 w plenty for my needs and very easy to set up and use. Perfect for the job. Recommended another great product.