This plug-and-play 40A DC-DC Charger wiring kit makes it easy to install your DC-DC – helping to keep your batteries topped up while on the road or via the sun with a solar input.

At 6.5 metres long, there’s enough wiring to help get you from the engine bay to the back of the vehicle, suitable for even those longer 4×4 setups. Using a heavy-duty 6AWG cable and a 60A fuse, this kit will help minimise the voltage drop between your starter and auxiliary battery and protect your setup from damage in case of a system fault.

In the kit, you’ll find a 3m accessories lead, designed for use on vehicles with a smart alternator, a pre-wired 3-pin Anderson-style lead designed to plug straight into your DC-DC, as well as a replacement fuse, cable ties, and a couple of screws to help mount your Anderson-style connector in place.

Features:

• Three-in Anderson Plug with Built-in Ignition Wire: This innovative plug design incorporates a built-in ignition wire, simplifying the installation process and ensuring a secure and reliable connection for your charging system.
• Backwards Compatible with Two-Pin Plugs: Our wiring kit is designed to be backwards compatible with two-pin plugs, offering greater flexibility and compatibility with a wider range of existing setups.
• 6.5m 6AWG Cable with 60A Fuse: The kit includes a 6.5-meter long, heavy-duty 6AWG cable, providing ample length for various installation scenarios. The integrated 60A fuse adds an extra layer of protection, ensuring safe and efficient operation of your charging system.

Wire up your solar panels in parallel with our MC4 Splitter Cable. The kit is designed as a plug-and-play solution, ideal for wiring up two of our Hardkorr 170W Fixed Solar Panels. Included is one male to dual female lead and and one female to dual male lead.

This plug-and-play 25A DC-DC Charger wiring kit makes it easy to install your DC-DC – helping to keep your batteries topped up while on the road or via the sun with a solar input.

At 6.5 metres long, there’s enough wiring to help get you from the engine bay to the back of the vehicle, suitable for even those longer 4×4 setups. Using a heavy-duty 9AWG cable and a 40A fuse, this kit will help minimise the voltage drop between your starter and auxiliary battery and protect your setup from damage in case of a system fault.

In the kit, you’ll find a 3m accessories lead, designed for use on vehicles with a smart alternator, a pre-wired 3-pin Anderson-style lead designed to plug straight into your DC-DC, as well as a replacement fuse, cable ties, and a couple of screws to help mount your Anderson-style connector in place.

Features:

• 6.5m 9AWG Cable with 40A Fuse: The kit includes a 6.5-meter long, heavy-duty 9AWG cable, offering sufficient length for diverse installation scenarios. The integrated 40A fuse provides added protection, ensuring safe and efficient operation of your charging system.
• Three-Pin Anderson Plug with Built-in Ignition Wire: This advanced plug design features a built-in ignition wire, simplifying the installation process and ensuring a secure and reliable connection for your charging system.
• Backwards Compatible with Two-Pin Plugs: Our wiring kit is designed to be backwards compatible with two-pin plugs, offering greater flexibility and compatibility with a broader range of existing setups.

Ideal for creating a parallel system, our 000AWG Battery Linking Cables can be used to increase the capacity of your battery setup.

The cables are sized at 85mm2 meaning that they’re ideal for even larger setups and come in a 300mm length. Coming complete with pre-crimped M8 ring terminals, they’re an easy DIY install.

What is a parallel battery connection?

This configuration allows you to pair two or more batteries together to increase the overall capacity of your battery system.

Before setting up your parallel battery system, ensure that the batteries used in the system are fully charged, the same age and size, and are fit for parallel setups (refer to your battery’s user guide).

The batteries can be linked in parallel simply by placing the batteries side by side and then connecting the positive terminals of each battery with the red lead, and then the negative terminals with the black lead.

The batteries will now effectively work together as one system. For example, if you have connected 2x 100Ah LiFePO4 Batteries, the system will act as one 200Ah system.

To charge/discharge a parallel battery system, simply connect your red lead to the positive terminal on the first battery in the system and the black lead on the negative terminal on the last battery in the system.

The Hardkorr guarantee

All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 12-month Australian warranty and a 30-day money-back guarantee.

Engineered to handle larger currents, this 00AWG Inverter Cable Kit can be used with inverters up to 3000W. The cables measure 750mm in length and are sized at 67.4mm² which means, that even with larger currents running through them, there won’t be any voltage drop between your battery and inverter.

Protected from overload and short-circuit faults, the positive lead comes with a 350A ANS mega fuse in-line to help safeguard your setup.

Designed to make your inverter install easy, each cable end comes with a pre-crimped M8 terminal with an M10 terminal on one end of the negative lead to help fit a shunt.

The Hardkorr guarantee

All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 12-month Australian warranty and a 30-day money-back guarantee.

Engineered to handle larger currents, this 0AWG Inverter Cable Kit can be used with inverters up to 2000W. The cables measure 750mm in length and are sized at 53.5mm² which means, that even with larger currents running through them, there won’t be any voltage drop between your battery and inverter.

Protected from overload and short-circuit faults, the positive lead comes with a 250A ANS mega fuse in-line to help safeguard your setup.

Designed to make your inverter install easy, each cable end comes with a pre-crimped M8 terminal with an M10 terminal on one end of the negative lead to help fit a shunt.

The Hardkorr guarantee

All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 12-month Australian warranty and a 30-day money-back guarantee.

This 000AWG lead is designed to be used to handle the current between your battery and shunt. The lead measures up at 85mm² which makes it ideal for setups using larger inverters up to 3000W, or as the negative connection between a parallel or series battery connection.

Equipped with a pre-crimped M8 terminal on one end with an M10 on the other, this lead will prevent voltage drop between your setup ensuring your shunt shows accurate information, everytime.

The Hardkorr guarantee

All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 12-month Australian warranty and a 30-day money-back guarantee.

Engineered to handle larger currents, this 2AWG Inverter Cable Kit can be used with inverters up to 1000W. The cables measure 750mm in length and are sized at 33mm² which means, that even with larger currents running through them, there won’t be any voltage drop between your battery and inverter.

Protected from overload and short-circuit faults, the positive lead comes with a 150A ANS mega fuse in-line to help safeguard your setup.

Designed to make your inverter install easy, each cable end comes with a pre-crimped M8 terminal with an M10 terminal on one end of the negative lead to help fit a shunt.

The Hardkorr guarantee

All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 12-month Australian warranty and a 30-day money-back guarantee.

Ideal for creating a secure connection in simple, series, or parallel solar setups, these MC4 Connectors are made to be fitted simply to your 4-6mm² cables.

The connectors are marked with a positive and negative symbol to prevent the risk of reversing polarity and are made to fit together securely using the connector’s locking mechanism.

Note: The MC4 connector marked with “+” simply notes that it is a male connection – this is also the case for the female (-) MC4 connection.

The Hardkorr guarantee

All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 12-month Australian warranty and a 30-day money back guarantee.

This Anderson to Ring Terminals Cable allows you to have a simple and secure connection to your battery. Especially useful with our DC Control Boxes, these cables can also be used with a large range of 12V appliances.

The flexible design of this cable makes it easy to install and use, making it perfect for those who need an extension to get the job done.

The Hardkorr guarantee

All Hardkorr products are manufactured using the highest quality materials. We are confident that they are the most durable in the market and will give you many years of reliable service. We stand behind this product with a comprehensive 12-month Australian warranty and a 30-day money back guarantee.