Name: Heat-Activated Solder Sleeve Kit (120 pcs)
Brand: Hardkorr
SKU: HKPSOLSLV120
Price: 49.00 AUD
Availability: InStock
Rating: 5.00 (1 reviews)

These heat-activated solder sleeves make joining electrical wires easy! No soldering iron required: with these sleeves you simply twist the wires together, slip a sleeve over the top and heat it up with a heat gun or lighter for a strong, waterproof connection.

SKU: HKPSOLSLV120

$49.00

Rated 5.00 out of 5 based on 1 customer rating

(1 customer review)

In stock

Add to wishlist

With this heat-activated solder sleeve kit, you can turn your wiring nightmares into dreams!

Say goodbye to your soldering iron and wire. No longer will you burn your fingers in trying to reach those hard to access places; all you have to do is have a heat gun or lighter, feed your wires inside the sleeve and heat it up – that’s it!

The solder inside the sleeve will melt into your wires, and combined with the heat-shrink tube and adhesive strips will form a waterproof, strong and highly conductive electrical connection which is almost impossible to break.

How it works

STEP 1

Strip each of the wires to be joined, exposing approximately 12mm of bare wire (this will vary slightly depending on the wire gauge). Ensure you leave enough insulation for the adhesive strips to bind to.

STEP 2

Slip an appropriately-sized solder sleeve over the end of one of the wires. Ensure you select the correct sleeve for your application; it should be a snug fit, but the sleeve should still be able to slide freely up and down the cable.

STEP 3

Bring the two wires together that you want to join. Push the bare ends together, ensuring that the wire strands from both sides combine with each other. Avoid just laying one wire on top of the other. If you wish, you can give the combined wires a twist to improve the connection.

STEP 4

Position the solder sleeve over the top of the combined wires, so that the grey solder is directly over the join. Ensure that the adhesive strips are positioned over part of the wire insulation, not over bare wire.

STEP 5

Apply heat from a heat gun or cigarette lighter to the entire length of solder sleeve. Ensure you distribute the heat so that the sleeve shrinks evenly. You may need to apply a little extra heat to the solder compared to the rest of the sleeve. Ensure the solder fully melts.

RESULT

Leave the completed heat shrink solder join to cure for a few minutes. Afterwards, you should be able to pull on both sides of the joined cable without it coming apart. Check the sleeve; minor discolouration from the heat is of no concern, but burning or cracking may compromise the integrity of the join.

Product Video

Specifications

Standard voltage	600V
Maximum voltage	1000V
Shrink ratio	2:1
Heat shrink activation temp	130°C
Solder melting point	125-150°C

Kit Contents

30x	26-24 AWG tubes
40x	22-18 AWG tubes
40x	16-14 AWG tubes
10x	12-10 AWG tubes
1x	Storage case

How long will it take for my gear to arrive?

Answer:

We endeavour to dispatch all orders within 2 business days after they are received. Here is an approximate guide to delivery timeframes once the order is dispatched:

QLD Metro: 1-2 business days after dispatch
QLD Other: 2-3 business days after dispatch

NSW Metro: 2-3 business days after dispatch
NSW Other: 3-4 business days after dispatch

VIC Metro: 3-4 business days after dispatch
VIC Other: 4-5 business days after dispatch

SA/NT Metro: 4-5 business days after dispatch
SA/NT Other: 5-7 business days after dispatch

WA Metro: 6-7 business days after dispatch
WA Other: 10-14 business days after dispatch

TAS: 5-6 business days after dispatch

How can I track my order?

Answer: When your order is completed and shipped, you will receive an automatic email containing your tracking number and a link to track your parcel. If you haven’t received your email, please check your junk folder. If you still cannot find it, please click here to email us and request another copy.

How much do you charge for shipping?

Answer: Delivery on all orders over $100 is free of charge within Australia, with the exception of the following remote postcodes: 0800-0999, 2898-2899, and 6215-6799. Any orders that do not meet the free shipping criteria are charged at our cost.

What is Transit Protection?

Answer: At checkout, you will have the option to take Transit Protection. For a small fee, Transit Protection guarantees the safety of your order in transit. If any product in your order is lost or damaged after it leaves our warehouse, we will organise for a replacement to be sent at no additional cost to you. Click here to find out more.

What happens if I do not select the Transit Protection option?

Answer: We send all orders via reliable Australian freight companies such as Australia Post and Star Track, and incidences of lost or damaged items are very rare. In the event that loss or damage does occur, we will always do our best to assist where we can. However, please note that in some cases you may need to seek resolution through the courier company directly if you do not take the Transit Protection option at checkout and your goods are lost or damaged in transit.

How can I change my delivery address after ordering?

Answer: If you need to change your delivery address, please email us as soon as possible.

Do you ship to other countries?

Answer: We do not ship to other countries via the website. We have distributors in selected countries who may be able to assist. Please contact us if you wish to enquire as to whether your country is supported by an international distributor.